Статья: ПРОЕКТИРОВАНИЕ НЕПОЛНОПРИВОДНОГО ПРЫГАЮЩЕГО РОБОТА С ГИБКИМИ СОЧЛЕНЕНИЯМИ (2022)

1.  Seok S. et al. Actuator design for high force proprioceptive control in fast legged locomotion // IEEE/RSJ Intern. Conf. on Intelligent Robots and Systems. IEEE, 2012. Р. 1970-1975.    
2.  Hauser S., Dujany M., Arreguit J., Ijspeert A., Iida F. Coupling-dependent convergence behavior of phase oscillators with tegotae-control // IEEE/RSJ Intern. Conf. on Intelligent Robots and Systems (IROS). 2021.    
3.  Ye K., Karydis K. Modeling and Trajectory Optimization for Standing Long Jumping of a Quadruped With a Preloaded Elastic Prismatic Spine // IEEE/RSJ Intern. Conf. on Intelligent Robots and Systems (IROS). 2021.    
4.  Fankhauser P., Hutter M. ANYmal: a unique quadruped robot conquering harsh environments // Research Features. 2018. N 126. Р. 54-57.    
5.  Bledt G. et al. MIT Cheetah 3: Design and control of a robust, dynamic quadruped robot // IEEE/RSJ Intern. Conf. on Intelligent Robots and Systems (IROS). IEEE, 2018. P. 2245-2252.    
6.  Park H. W., Wensing P. M., Kim S. High-speed bounding with the MIT Cheetah 2: Control design and experiments // Intern. Journal of Robotics Research. 2017. Vol. 36, N 2. P. 167-192.    
7.  Zhong Y. et al. Analysis and research of quadruped robot’s legs: a comprehensive review // Intern. Journal of Advanced Robotic Systems. 2019. Vol. 16. N 3. P. 1729881419844148.    
8.  Borisova O., Borisov I., Kolyubin S., Stramigioli S. Design of Galloping Robots with Elastic Spine: Tracking Relations between Dynamic Model Parameters Based on Motion Analysis of a Real Cheetah // IEEE/RSJ Intern. Conf. on Intelligent Robots and Systems (IROS). 2021.  EDN: WCZIKH  
9.  Folkertsma G. A. Energy-Based and Biomimetic Robotics. Enschedе: Univ. of Twente, 2017.    
10.  Seok S. et al. Design principles for energy-efficient legged locomotion and implementation on the MIT cheetah robot // IEEE/ASME Trans. on Mechatronics. 2014. Vol. 20, N 3. P. 1117-1129.    
11.  Folkertsma G. A., Kim S., Stramigioli S. Parallel stiffness in a bounding quadruped with flexible spine // IEEE/RSJ Intern. Conf. on Intelligent Robots and Systems. IEEE, 2012. P. 2210-2215.    
12.  Hurst J. W., Chestnutt J. E., Rizzi A. A. An actuator with physically variable stiffness for highly dynamic legged locomotion // Proc. IEEE Intern. Conf. on Robotics and Automation, ICRA’04. IEEE, 2004. Vol. 5. P. 4662-4667.    
13.  Vu H. Q. et al. A variable stiffness mechanism for improving energy efficiency of a planar single-legged hopping robot // Proc. of the 16th Intern. Conf. on Advanced Robotics (ICAR). IEEE, 2013. P. 1-7.    
14.  Radhakrishnan V. Locomotion: dealing with friction // Proc. of the National Academy of Sciences. 1998. Vol. 95, N 10. P. 5448-5455.  
15.  Haberland M. et al. The effect of swing leg retraction on running energy efficiency // IEEE/RSJ Intern. Conf. on Intelligent Robots and Systems. IEEE, 2011. P. 3957-3962.    
16.  Thomaszewski B. et al.Computational design of linkage-based characters // ACM Trans. on Graphics (TOG). 2014. Vol. 33, N 4. P. 1-9.    
17.  Pratt G. A., Williamson M. M. Series elastic actuators // Proc. IEEE/RSJ Intern. Conf. on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots. IEEE, 1995. Vol. 1. P. 399-406.    
18.  Pappalardo A. et al. Hunt-crossley model based force control for minimally invasive robotic surgery // Biomedical Signal Processing and Control. 2016. Vol. 29. P. 31-43.    
19.  Townsend W., Salisbury J. The effect of coulomb friction and stiction on force control // Proc. IEEE Intern. Conf. on Robotics and Automation. IEEE, 1987. Vol. 4. P. 883-889.    
20.  Lakatos D., Albu-Schäffer A. Switching based limit cycle control for compliantly actuated second-order systems // IFAC Proc. Volumes. 2014. Vol. 47, N 3. P. 6392-6399.    
21.  Howell L. L.Compliant mechanisms // 21st Century Kinematics; Ed. I. M. McCarthy. Springer, 2013. P. 189-216.    
22.  Ashby M. F., Jones D. R. H. Engineering Materials 1: An Introduction to Properties, Applications and Design. Elsevier, 2012. Vol. 1.    
23.  Chen G. M., Jia J. Y., Li Z. W. Right-circular corner-filleted flexure hinges // IEEE Intern. Conf. on Automation Science and Engineering. IEEE, 2005. P. 249-253.    
24.  Lobontiu N.Compliant Mechanisms: Design of Flexure Hinges. CRC Press, 2002.  EDN: WVVFMV  
25.  Naves M. et al. Flexure-based 60 degrees stroke actuator suspension for a high torque iron core motor // Precision Engineering. 2020. Vol. 63. P. 105-114.  EDN: FTCHFE  
26.  Naves M., Aarts R., Brouwer D. M. Large-stroke flexure hinges: Building-block-based spatial topology synthesis method for maximising flexure performance over their entire range of motion // Mikroniek. 2017. Vol. 57, N 3. P. 5-9.    
27.  Boers A. S. B. et al. Inverted curved flexure hinge with torsional reinforcements in a printed prosthetic finger // 33rd ASPE Annual Meeting. 2018.    
28.  SPACAR Wiki. 2021 [Электронный ресурс]: , 10.04.2021.    
29.  Fix M. E., Brouwer D. M., Aarts R. G. K. M. Building Block Based Topology Synthesis Algorithm to Optimize the Natural Frequency in Large Stroke Flexure Mechanisms // Intern. Design Engineering Technical Conf. and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. Vol. 83914. P. V002T02A007.    
30.  ROBOTIS e-Manual AX-12A [Электронный ресурс]: , 25.06.2021.    
31.  Тензорезисторы KYOWA. 2018 [Электронный ресурс]: , 20.06.2021.